page 27
Owner’s Manual
GX2350S
6. Turn the Channel Selector knob to select the
name.
7. Press the CALL/SET key to display the logged
call.
8. Press the CALL/SET key to resend the INDIVIDUAL CALL.
9. To exit from Individual Call Waiting, select EXIT and press the
CALL/SET key.
10. Turn the Channel Selector knob to select another logged call or to
select EXIT.
11. Press the CALL/SET key to access next logged call or EXIT.
6.8
POSITION REQUEST
The position request mode may be used to show the position of another
DSC radio with this feature. The other vessel must have an operating GPS
receiver connected to its DSC transceiver and must not have its transceiver
set to deny position requests.
1. Select a traffic channel, then press the CALL/
SET key. The transceiver will beep, then the
DSC CALLING menu will appear in the display.
2. Rotate the Channel Selector knob or press the
UP/DOWN keys to select the POS REQUEST.
3. Press CALL/SET key to appear the Position
request directory. This directory uses the
INDIVIDUAL Directory information.
4. Rotate the Channel Selector knob or press the
UP/DOWN keys to select a name.
5. Press the CALL/SET key to transmit the
position request DSC call.
JUN15 08:45P
ID987654321
A
EXIT
>SEND
>NAME1
NAME2
NAME3
NAME4
A
>INDIVIDUAL
ALL SHIP
STANDBY
CALL WAIT
A
>TOM
MIKE
BOB
DICK
A
ALL SHIP
STANDBY
CALL WAIT
>POS REQUEST
A
TOM
MIKE
>BOB
DICK
A
TX HI USA
BOB
A
