page 17
Owner’s Manual
GX2350S
FOG HORN mode:
Automatic signaling is transmitted through the PA speaker.
5.11.1. Operating the PA HAIL mode
1. Press the PA/FOG key.
Toggle between the PA HAIL and FOG HORN
mode by pressing the PA/FOG key.
2. Press the PTT switch to speak through the hail speaker.
Rotate the Channel Selector knob to control the AF output level.
The AF output level can be set from 0 to 20 watts.
3. To exit the PA HAIL mode, press any key other than PTT, MEM,
SCAN, H/L, UP, DOWN keys and Channel Selector.
Example : 16/9, WX or CALL SET.
5.11.2. Operating the FOG HORN mode
Operator can select from FOG 1, FOG 2, FOG 3, FOG 4, HORN, SIREN,
AGROUND, or ANCHOR.
FOG 1: POWER BOAT UNDERWAY
FOG 2: POWER BOAT STOPPED
FOG 3: SAIL BOAT, FISH VESSEL, TOW VESSEL
FOG 4: VESSEL UNDER TOW
1. Press the PA/FOG key on PA HAIL mode.
Toggle between the PA HAIL and FOG HORN
modes by pressing the PA/FOG key.
2. Turn the Channel Selector knob to select the
function.
3. Press the CALL/SET key to operate the FOG HORN mode.
Horn – When PTT is pressed, emits HORN SOUND from the PA speaker.
Siren – When PTT is pressed, emits SIREN SOUND from the PA speaker.
4. On the SIREN and FOG HORN modes, press the
PTT switch to active tone through the PA speaker.
Turn the Channel Selector knob to control the
AF output level. The AF output level can be set
from 0 to 20 watts.
5. To exit the FOG HORN mode, press any key other than PTT, MEM,
SCAN, H/L, UP, DOWN keys and Channel Selector.
PUBLIC
ADDRESS
VOLUME
A
>FOG1
FOG2
FOG3
FOG4
A
FOG2
FOG3
FOG4
>SIREN
A
SIREN
VOLUME
A
