Standard Horizon QUEST+ GX1256S, Руководство пользователя

Страница: 53 / 72

GX1256S Page 53
[
CALL/SET
] Key
The [ CALL/SET
] key functions as the enter key.
Secondary use
Press the [ CALL/SET
] key to access the DSC OPERATION menu.
Press and hold the [ CALL/SET
] key to access the SETUP menu.
[
DW
] Key
Watches for a transmission on CH16 and another selected channel until
either signal is received. (Dual watch)
NOTE : When the DSC SCANNING feature is enabled (see section 7.15
DSC SCAN), the radio watches for a transmission on CH16, another
selected channel, and
CH70 until either signal is received (Triple watch).
Secondary use
Press and hold [ DW
] key, intercom operation will operate between radio
and RAM Mic.
[
NAV
] Key
Press and hold this key, when connected to the GPS receiver, the LCD
displays Position Data from the GPS.
[
WX
] Key
Immediately recalls the previously selected NOAA weather channel from
any channel location.
Secondary use
1. Holding down the [ 16/9
] key while pressing the [
WX
] key changes
the mode from USA to International or Canadian.
NOTE : If position is displayed, this icon will be hidden.
2. Holding down the [ WX
] and [
SCAN
] key while turning the power on
resets the microprocessor and erases scan channels from memory.
This clears the memory and establishes the factory-set defaults. For
a list of these defaults, see the section on Resetting the Transceiver’s
Microprocessor.
[
DISTRESS
]
KEY
Used to send a DSC Distress Call. To send the distress call:
1. Lift the red rubber cover.
2. Press and hold the Red button. The RAM+ display will
count down (3-2-1) and then transmit the Distress call.
3. When the distress signal is sent, Ch70 and “TX” icon
will appear on the LCD. After the message has been