Standard Horizon QUEST+ GX1256S, Руководство пользователя

Страница: 50 / 72

GX1256S Page 50
8.6 TIME OFFSET
Sets the time difference between local time and UTC (Universal Time Coor-
dinated or GMT Greenwich Mean Time). Time is displayed if the
QUEST+ is
connected to a GPS receiver.
1. Press and hold down the [ CALL/SET
(
MENU
)] key until
“RADIO SETUP” appears.
2. Press the [ CALL/SET
(
MENU
)] key, then press the
[
DOWN
] key to select “TIME.”
3. Press the [ CALL/SET
(
MENU
)] key to enable adjusting
this item (The number in the display will flash).
4. Press the [ UP
] or [
DOWN
] key to select “Time Offset”
from UTC. Be sure that when selecting the offset that
the display shows “TIME –” for negative offset, or
“TIME +” for a positive offset. Refer to Offset Time Table.
See illustration below to find your offset time from UTC.
If 0:0 is assigned, the time is the same as UTC.
6. Press the [ CALL/SET
(
MENU
)] key to store the time off-
set.
7. Press the [ DOWN
] key to select “EXIT,” then press the
[
CALL/SET
(
MENU
)] key.
8. Press the [ DOWN
] key to select “EXIT,” then press the [
CALL/
SET
(
MENU
)] key to return to the normal operation.
NOTE
During Daylight Saving time subtract 1 hour from the offset shown above
and enter this offset in step 4 above.
OFFSET TIME TABLE