Standard Horizon QUANTUM Series GX3500S, Руководство пользователя

Страница: 79 / 100

Page 79 GX3500S
[
ENT
] Key
Press the [ ENT
] key to enter the menu selection and/or keypad entry.
Note : The channel number entering is the same as the manner due to front
panel’s keypad of the GX3500S ; press the key with the first digit then press the
key with the second digit and press the [ ENT
] key to switch to the channel.
14.2 INTERCOM OPERATION
14.2.1 Communication
1. Press the [ F
] key followed by the [
5
(
IC
)] key, the mode is
changed to “INTERCOM” mode.
2. If your GX3500S is equipped with two VH-310 Handsets (or
RAM+ Mics), select the station you wish to communicate
(RADIO, RAM, or ALL) with the [
]/[ ] key, then press the [
ENT
] key.
3. When the “INTERCOM” operation is
activated, “ IC ” is displayed on the VH-
310 Handset (and RAM+ Mic, if used)
and “INTERCOM” is displayed on the
GX3500S .
4. Press the PTT switch, “ TALK ” is dis-
played.
NOTE : A warning beep is emitted when
the RAM+ Mic PTT switch is pressed
while the transceiver microphone’s PTT switch is pressed.
5. Speak slowly and clearly into the microphone, hold the microphone about
1/2 inch away from your mouth.
6. When finished, release the PTT switch.
7. To exit the “INTERCOM” mode and return to radio operation mode, press
the [ F
] key followed by the [
5
(
IC
)] key again.
14.2.2 Calling
Press and hold the [ 5
(
IC
)] key for 1 second when the “INTERCOM” operation is
activated, a calling beep is emitted from the GX3500S speaker.
(
VH-310 ’s PTT switch is pressed)
(
GX3500S ’s PTT switch is pressed)