Standard Horizon QUANTUM Series GX3500S, Руководство пользователя

Страница: 77 / 100

Page 77 GX3500S
KEYPAD
[
1
(
DIM
)] key
When in radio mode, this key is used to directly select channel digit “1” in
a channel number.
Secondary use
Press the [ F
] key first then press the [
1
(
DIM
)] key to access the LCD
Dimmer menu. Refer to section “ 10.15 LCD DIMMER ” for details.
[
2
(
MEM
)] Key
When in radio mode, this key is used to directly select channel digit “2” in
a channel number.
Secondary use (Depends on the transceiver version)
Press the [ F
] key first then press the [
2
(
MEM
)] key, memorize the se-
lected channel into the transceiver scan memory for scanning. When
repeat the same procedures ([
F
]
[ 2
(
MEM
)]), will delete the channel
from the scan memory. Refer to section “ 10.12 SCANNING ” for details.
[
3
(
SCAN
)] Key
When in radio mode, this key is used to directly select channel digit “3” in
a channel number.
Secondary use (Depends on the transceiver version)
Press the [ F
] key first then press the [
3
(
SCAN
)] key to start and stop the
scanning of programmed channels. Refer to section “ 10.12 SCANNING ”
for details.
[
4
(
DW
)] Key
When in radio mode, this key is used to directly select channel digit “4” in
a channel number.
Secondary use (Depends on the transceiver version)
Press the [ F
] key first then press the [
4
(
DW
)] key to scan for voice com-
munications on the priority channel and another selected channel until a
signal is received on either channel (Dual Watch). Refer to section “
10.11
DUAL WATCH
(
TO CH16
)” for details.
[
5
(
IC
)] Key
When in radio mode, this key is used to directly select channel digit “5” in
a channel number.
Secondary use
Press the [ F
] key then press the [
5
(
IC
)] key to activate intercom function
between RAM+(s) or VH-310 handset(s).
Refer to section “ 10.16 INTERCOM OPERATION ” for details.