manualshive.com logo in svg

Standard Horizon PF-P320, Руководство оператора

Поделиться
Скачать
Standard Horizon PF-P320 Скачать руководство пользователя страница 25

2. Operation Procedure

19

2-6 How to Fold Cross- Fold and 12-page Letter Fold.

NOTE
-  In case of Cross fold or 12-page letter
folding, sheet wider than 210 mm (8.5") may
not be folded completely.
-  In case of cross fold or 12-page letter
folding, to use, Cross Folding Guide
(option)  is recommended.

( Meaning of cross folding )

Sheet is folded into half, and then this
single folded sheet (signature) is folded
once again in half.
When folded sheet is opened, each
creases of this signature become criss-
cross pattern.

( Meaning of sheet 12-page letter fold )

Sheet is folded into half, and then this
single folded sheet is folded in letter size.

In this section, procedure of folding is
explained with A3 (11" x 17") size sheet
without using cross folding guide (Op-
tion).

1.

Fold A3 size sheet into half

(Please refer to “3-1 Operation Proce-

dure” in page 12.)

2.

 Press tightly fold edge of sheets.

NOTE
If fold edge of sheet is not pressed suffi-
ciently, sheet (signature) will not be folded
completely.

[Crossed Letter Folding]

[Cross Fold]

A crease of sheet

Содержание PF-P320















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды