SETTING THE CLOCK
The MST660 has a built in clock.
To display the clock, briefly press the DSP button. The clock will be displayed
for 5 seconds, after which it will return to its previous state.
To set the clock:
1. Turn the unit ON (using the PWR button).
2. Press and hold the DSP button for about 1 second until the time appears
on the display. The two dots between the digits will be flashing to indicate
that the clock is now in the time setting mode.
3. While the dots are still flashing, press the button to set the hours or the
button to set the minutes.
Note: The time setting mode will be cancelled automatically after 5 seconds if
the or buttons are not pressed.
4. When finished, simply press any other button or wait a few seconds and
the display will return to its previous state.
MST660 Owner’s Manual Page 17
random order. To select ‘Random Play’ (also known as ‘Shuffle Play’) press
the RDM button. ‘RDM’ will be displayed.
To cancel ‘Random Play’, press the RDM button again.
Switching Between CD and Radio
To select the radio while playing a CD simply press BND. The CD will stop and
the radio will play.
To return to the CD, press . As long as the CD is left inside the player and
the unit remains connected to the power source, it will begin playing the last
selected track.
Note: If the
button is pressed when there is no CD in the mechanism, the
MST660 will simply ignore the command and will continue to play the radio.
Ejecting the CD
To eject the CD press the
button. ‘EJT’ will be displayed and the CD will
appear in the slot.
Note: If the ejected disc is left in the slot it will be drawn back into the player
automatically after 15 seconds to protect it.
MST660 I.M.-2 21/12/99 1:26 PM Page 19
