Page 12 Owner’s Manual MST660
OPERATION
GENERAL FUNCTIONS
Power ON/OFF
To turn the unit ON, press the PWR button. The unit will resume the mode that
was selected when it was last turned off.
To turn the unit off, press the PWR button again. Note that when the unit is
turned OFF, the clock is not displayed.
Controls
The Volume, Bass, Treble, Balance and Fader controls are selected
electronically. The default selection is the Volume control. To select another
control, press the SEL button repeatedly until the name of the control you
require is displayed on the LCD. Each press cycles to the next control in
sequence. After a moment, the display will change to show the current setting
for that control. If no button is pressed for 6 seconds, the display returns to
normal and the control defaults back to the Volume control.
•
Volume: To adjust the Volume, simply press the – or + buttons. ‘ V - ’
will appear on the display along with a number indicating the current
setting. Press – to decrease the volume level or + to increase the volume
level.
•
Bass: Press the SEL button repeatedly until ‘BAS’ is displayed. Press –
to decrease the Bass level or + to increase the Bass level.
•
Treble: Press the SEL button repeatedly until ‘TRE’ is displayed. Press –
to decrease the Treble or + to increase the Treble.
•
Balance: Press the SEL button repeatedly until ‘BAL’ is displayed. Press
– to reduce the volume in the right speakers or + to increase the volume
in the left speakers.
To set the Balance to the center position, press – or + to reduce the
front or rear setting until ‘C - 00’ is displayed, indicating the centre position.
•
Fader: Press the SEL button repeatedly until ‘FAD’ is displayed.
Press + to fade the sound toward the Front speakers (and reduce the
volume in the Rear speakers). ‘F’ and a number is displayed to show the
Front speaker setting.
Press – to fade the sound to the Rear speakers (and reduce the volume in
the front speakers). ‘R’ and a number is displayed to show the Rear
speaker setting.
To set the fader to the center position, press – or + to reduce the front
or rear setting until ‘C - 00’ is displayed, indicating the center position.
MST660 I.M.-2 21/12/99 1:26 PM Page 14
