manualshive.com logo in svg

Standard Horizon Intrepid LE GX1265S, Руководство пользователя

Поделиться
Скачать
Standard Horizon Intrepid LE GX1265S Скачать руководство пользователя страница 33

GX1265S

Owner’s Manual

page 30

8

MAINTENANCE

The inherent quality of the solid-state components used in this transceiver
will provide many years of continuous use. Taking the following
precautions will prevent damage to the transceiver.

* Never key the microphone unless an antenna or suitable dummy load is
connected to the transceiver.
* Ensure that the supply voltage to the transceiver does not exceed 16
VDC or fall below 11 VDC.

In the unlikely event of serious problems, please contact your STANDARD
HORIZON Dealer or our repair facility. Address and phone numbers for
this facility, as well as warranty information, are contained in your Owner’s
Manual Supplement.

8.1 REPLACEMENT PARTS

Occasionally an owner needs a replacement mounting bracket or knob.
These can be ordered from our Parts Department by writing or calling:

STANDARD HORIZON, a division of VERTEX STANDARD.
17210 Edwards Rd., Cerritos, CA 90703, U.S.A.
(562)404-2700

Commonly requested parts, and their part numbers are listed below.

Microphone, White (CMP349WL) .............................. MP51000420
Microphone, Black (CMP349BL) ................................ MP51000430
Standard Mounting Bracket, White ............................ 444X160030
Standard Mounting Bracket, Black ............................. 444X160130
Standard Mounting Bracket Knob, White ................... 444X154030
Standard Mounting Bracket Knob, Black ................... 444X154130
Volume Control Knob ................................................. 444X154500
Squelch Control Knob ................................................ 444X154500
Accessory Cable ........................................................ ZD00600090
Distress Key Cover .................................................... 444X053012
Power Cord ................................................................ ZC01300010
Mic Hanger, White ...................................................... 277X155020
Mic Hanger, Black ...................................................... 277X155120

Содержание Intrepid LE GX1265S





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды