Standard Horizon HX851, Руководство по обслуживанию

Страница: 14 / 34

14
Alignment
05: Transmitter Power Output (Mid1)
Click the left mouse button on the [ 05: Mid1 Power
]
button. The transceiver now is in the Transmitter
Mid1 Power Output Alignment Mode.
Click the left mouse button on the [ PTT On
] button.
Click the [
] / [ ] button (or Move the Slide Bar), if
necessary, until the Wattmeter displays 2.5 W ±0.1 W.
Click the left mouse button on the [ PTT Off
] button,
then click the left mouse button on the [ 05: Mid1
Power
] button to exit the the Transmitter Mid1 Power
Output Alignment Mode.
06: Transmitter Power Output (Low)
Click the left mouse button on the [ 06: Low Power
]
button. The transceiver now is in the Transmitter
Low Power Output Alignment Mode.
Click the left mouse button on the [ PTT On
] button.
Click the [
] / [ ] button (or Move the Slide Bar), if
necessary, until the Wattmeter displays 0.8 W ±0.1 W.
Click the left mouse button on the [ PTT Off
] button,
then click the left mouse button on the [
06: Low
Power
] button to exit the the Transmitter Low Power
Output Alignment Mode.
07: Transmitter Modulation
Set the AF Generator output to 200 mV rms @ 1 kHz
tone.
Click the left mouse button on the [ 07: Deviation
]
button. The transceiver now is in the Transmitter
Modulation Alignment Mode.
Click the left mouse button on the [ PTT On
] button.
Click the [
] / [ ] button (or Move the Slide Bar), if
necessary, until the deviation to 4.4 kHz (±0.1 kHz).
Click the left mouse button on the [ PTT Off
] button,
then click the left mouse button on the [ 07: Devia-
tion
] button to exit the the Transmitter Modulation
Alignment Mode.