Standard Horizon HX851, Руководство по обслуживанию

Страница: 13 / 34

13
01: Transmitter Maximum Output Power
Click the left mouse button on the [ 01: Max Power
]
button. The transceiver now is in the Transmitter
Maximum Output Power Confirmation Mode.
Click the left mouse button on the [ PTT On
] button.
Confirm that the Wattmeter displays more than 6.8 W.
Click the left mouse button on the [ PTT Off
] button,
then click the left mouse button on the [ 01: Max
Power
] button to exit the Transmitter Maximum
Output Power Confirmation Mode.
03: Transmitter Power Output (High)
Click the left mouse button on the [ 03: High Power
]
button. The transceiver now is in the Transmitter
High Power Output Alignment Mode.
Click the left mouse button on the [ PTT On
] button.
Click the [
] / [ ] button (or Move the Slide Bar), if
necessary, until the Wattmeter displays 6.0 W ±0.1 W.
Click the left mouse button on the [ PTT Off
] button,
then click the left mouse button on the [ 03: High
Power
] button to exit the the Transmitter High Power
Output Alignment Mode.
Alignment
02: Transmitter Power Output
Click the left mouse button on the [ 02: Po Control
]
button. The transceiver now is in the Transmitter
Maximum Output Power Alignment Mode.
Click the left mouse button on the [ PTT On
] button.
Click the [
] / [ ] button (or Move the Slide Bar), if
necessary, until the Wattmeter displays 6.0 W ±0.1 W.
Click the left mouse button on the [ PTT Off
] button,
then click the left mouse button on the [ 02: Po Con-
trol
] button to exit the Transmitter Maximum Out-
put Power Alignment.
04: Transmitter Power Output (Mid2)
Click the left mouse button on the [ 04: Mid2 Power
]
button. The transceiver now is in the Transmitter
Mid2 Power Output Alignment Mode.
Click the left mouse button on the [ PTT On
] button.
Click the [
] / [ ] button (or Move the Slide Bar), if
necessary, until the Wattmeter displays 5.0 W ±0.1 W.
Click the left mouse button on the [ PTT Off
] button,
then click the left mouse button on the [
04: Mid2
Power
] button to exit the the Transmitter Mid2 Power
Output Alignment Mode.