Page 9
HX407
3.3.3 BATTERY CHARGING
1. Turn the transceiver off.
2. Insert the DC plug from the
PA-45B
into the DC jack on the
CD-50
side
panel, then plug the
PA-45B
into the
AC line outlet.
3. Insert the
HX407
(with the battery
pack) into the
CD-50
; the antenna
should be at the left side when view-
ing the charger from the front.
4. If the
HX407
is inserted correctly,
the Red “
CHARGING
” indicator will
glow. A fully-discharged pack will be
charged completely in approximately
3 hours.
5. When charging is completed, the red LED indicator will change to green.
Remove the transceiver from the
CD-50
, and unplug the
PA-45B
from
the AC line outlet.
WARNING
Do not reverse-connect the battery terminals.
Do not parallel-connect the battery terminals.
Do not change batteries in hazardous locations.
To reduce the risk of explosion, recharge the batteries outside of
hazardous locations.
CAUTION
The
CD-50
cradle is NOT designed to be waterproof. Do not attempt to
charge in water hazardous locations.
NOTE
The
CD-50
cradle is only designed for the charging of the
HX407
’s bat-
tery, and is not suitable for other purposes. The
CD-50
may contribute
noise to TV and radio reception in the immediate vicinity, so we do not
recommend its use adjacent to such device.
PA-45B
CD-50
Application for FCC / IC
FCC ID: K6630394X20
IC: 511B-30394X20
