Standard Horizon Eclipse GX1400 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 91

background image

4

4 ONLINE WARRANTY REGISTRATION

NOTE

: Visiting the STANDARD HORIZON website from time to time may be

ben-

eficial. When new products are released, information will appear on the

website.

5 Safety Precautions (Be Sure to Read)

Be sure to read these important precautions, and use this product safely.

Yaesu is not liable for any failures or problems caused by the use or misuse of this
product by the purchaser or any third party. Also, Yaesu is not liable for damages
caused through the use of this product by the purchaser or any third party, except in
cases where ordered to pay damages under the laws.

Types and meanings of the marks

DANGER

This mark indicates an imminently hazardous situation, which, if not

avoided, could result in death or serious injury.

WARNING

This mark indicates a potentially hazardous situation, which, if not

avoided, could result in death or serious injury.

CAUTION

This mark indicates a potentially hazardous situation, which, if not avoided,

may result in minor or moderate injury or only property damage.

Types and meanings of symbols

These symbols signify prohibited actions, which must not be done to use this product

safely. For example: indicates that the product should not be disassembled.
These symbols signify required actions, which must be done to use this product safely.

For example,: indicates that the power plug should be disconnected.

Do not operate the device when flammable gas

is generated.

Doing so may result in fire and explosion.

Do not transmit with this device while carrying

or using a medical appliance such as a cardiac

pacemaker. When transmitting, use an external

antenna and keep as far as possible away from

the external antenna.

The radio wave emitted by the transmitter can

cause the medical device to malfunction and result

in injury or death.

If thunder and lightening develop nearby when

an external antenna is used, immediately turn

this transceiver OFF, and disconnect the exter-

nal antenna from it.

A fire, electrical shock, or damage may result.

Do not touch any liquid leaking from the liquid

display with your bare hands.

There is a risk of chemical burns occurring when

the liquid comes into contact with the skin or gets

into the eyes. In this case, seek medical treatment

immediately.

DANGER

«
...
4
5
6
7
8
...
»

Содержание Eclipse GX1400




























































































Отзывы:

Нет отзывов

Похожие инструкции для Eclipse GX1400

Бренд: Belkin Страницы: 1

Бренд: MicroTalk Страницы: 10

Satellite Radio

Бренд: Raritan Страницы: 2

Бренд: Master Tailgaters Страницы: 6

Бренд: Zodiac Страницы: 31

Бренд: Satel Страницы: 30

Бренд: LENCO Страницы: 79

Бренд: GCT Страницы: 35

Бренд: International Receiver Company Страницы: 31

Бренд: perfect pro Страницы: 116

Бренд: Alecto Страницы: 2

freecomm 150 PMR 446

Бренд: stabo Страницы: 20

Бренд: Yaesu Страницы: 122

MICROTALK CXR800C

Бренд: Cobra Страницы: 18

Бренд: Lafayette Страницы: 7

Бренд: Baofeng Страницы: 15

AJ3260 - annexe 1

Бренд: Philips Страницы: 1

Бренд: Philips Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды