51
6.
Press the [▲] or [▼] key to scroll the screen and
see the MMSI (or name) of the calling vessel,
category of the call and requested operating
channel.
RX GROUP
YAESU
CATEG: ROUTINE
CH: 08
SINCE: 00:08
ABLE
QUIT
UNABLE
7. Press the [
QUIT
] soft key to display the operating
channel number of the requested channel.
8. Listen to the channel for the person calling the group for a message.
9. If you want to respond, monitor the channel to make sure it is clear, then
press the
PTT
switch on the microphone and talk to the calling ship(s).
NOTE
10.5.4 Setting up the Group Call Ringer
The transceiver has the capability to turn off the group call ringer.
1. [
]
“
SETUP
”
“
DSC SETUP
”
“
DSC BEEP
”
2. Select “
GROUP
” with the [▲] or [▼] key, then
press the [
SELECT
] soft key.
BACK
SELECT
DSC BEEP
INDIVIDUAL
GROUP
ALL SHIPS
POS REQUEST
ON
ON
ON
OFF
3.
Press the [▲] or [▼] key to select “
OFF
”, then
press the [
ENTER
] soft key.
BACK
ENTER
GROUP
OFF
ON
4. Press the [
16/S
] key or press the [
CLR
] soft key to return to radio opera
-
tion mode.
If you wish to return to enabling the ringer tone, just repeat the above procedure,
pressing the [▲] or [▼] key to select “
ON
” in step 3 above.
When there is an unread group call, the “ ” icon will appear on
the display. You may review the unread group call from the DSC
log, refer to section “10.11.3 Reviewing a Logged Other Calls”.
After a group call is received, the time the call was made and the
ships MMSI or vessels name will appear on the LCD.
