page 18
Owner’s Manual
GX1250SA
5.8
MEMORY SCANNING
1. Adjust the SQL knob until background noise disappears.
2. Select a desired channel to be scanned using the UP or DOWN
key. Press and hold down the SCAN key until MEM appears on the
LCD which programs the channel into the transceivers memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the transceiver’s memory, select a
channel to be erased with the UP or DOWN key. Press and hold
down the SCAN key until MEM disappears on the LCD.
5. To start scanning, press the SCAN key. Scanning will proceed from
the lowest to the highest programmed channel number and will stop
on a channel when a transmission is received.
6. The received channel number will blink during busy stop.
7. To stop scanning, press the SCAN, 16/9, WX, or PTT key.
5.9
PRIORITY SCANNING (PRI-SCAN)
1. To select priority scanning, hold down the SCAN key and turn the
transceiver on.
2. Press SCAN key again. Scanning will proceed between the
memorized channels (MEM CH) and the priority channel (P-CH).
The priority channel will be scanned after each programmed
channel.
(The priority channel (P-CH) is channel 16.)
3. To stop scanning, press the SCAN, 16/9, WX, or PTT key.
P-CH.
MEM CH1
MEM CH2
P-CH.
