Standard Horizon ECLIPSE DSC PLUS GX1150 Скачать руководство пользователя страница 26

Страница: 26 / 80

GX1150

Page 26

1. Program NOAA weather channels into the transceiver’s memory for scan-

ning. Follow the same procedure as for regular channels under section “

11.7

SCANNING

.”

2. Press the

key once to start memory scanning or priority scanning (deter-

mined from the “

RADIO SETUP

” selection, see page 63 for details).

3. The programmed NOAA weather channels will be scanned along with the

regular-programmed channels. However, scanning will not stop on a nor-
mal weather broadcast unless a NOAA alert is received.

4. When an alert is received on a NOAA weather channel, scanning will stop and

the transceiver will emit a loud beep to alert the user of a NOAA broadcast.

5. Press the

key to stop the alert tone and receive the weather report.

NOTE

If the

key is not pressed the alert tone will be emitted for 5 minutes

and then the weather report will be received.

The Weather Alert feature is also engaged while the transceiver is
receiving on one of the NOAA weather channels.

11.6.2 NOAA Weather Alert Testing

NOAA tests the alert system every Wednesday between 11AM and 1PM. To
test the

GX1150

’s NOAA Weather alert feature, on Wednesday between 11AM

and 1PM, setup as in previous section and confirm the alert is heard.

11.7 SCANNING

Allows the user to select the scan type from Memory scan or Priority scan.
“Memory scan” scans the channels that were programmed into memory. “Prior-
ity scan” scans the channels programmed in memory with the priority channel.

11.7.1 Selecting the Scan Type

1. Press and hold down the

key until “

SETUP

” appears.

2. Press the

key, then select “

SCAN TYPE

” in the

“

RADIO SETUP

” menu with the

keys.

3. Press the

key.

4. Press the

keys to select “

PRIORITY SCAN

”

or “

MEMORY SCAN

.”

5. Press the

key to store the selected setting.

6. To exit this menu and return to radio operation

mode press the

key.

Содержание ECLIPSE DSC PLUS GX1150

















































































Результаты поиска

Содержание ECLIPSE DSC PLUS GX1150

Отзывы:

Похожие инструкции для ECLIPSE DSC PLUS GX1150

Бренды по названию

Популярные бренды

Standard Horizon ECLIPSE DSC PLUS GX1150, Руководство пользователя

Результаты поиска

Содержание ECLIPSE DSC PLUS GX1150

Отзывы:

Похожие инструкции для ECLIPSE DSC PLUS GX1150

Бренды по названию

Популярные бренды