manualshive.com logo in svg

Standard Horizon CP150, Руководство пользователя

Поделиться
Скачать
Standard Horizon CP150 Скачать руководство пользователя страница 59

  

GPS Chart 150

Page 61

the area selecting On or Contour options. This is valid also for the categories: FISHING FACILITY,
MARINE FARM/CULTURE, MILITARY PRACTICE AREA, RESTRICTED AREA, SEAPLANE LAND-
ING AREA. When the area is small, it is identified only by the boundary. The default setting is Contour.

'MENU' +  "MAP SETUP" + 'ENTER' + "NAV AIDS SETTINGS" + 'ENTER' + "ATTENTION AREAS" + 'ENTER'

Audible  Alarm

It is possible enable (On) or disable (Off) the Audible Alarm. The default setting is On.

'MENU' + "ADVANCED SETUP" + 'ENTER' + "ALARMS" + 'ENTER' + "AUDIBLE ALARM" + 'ENTER'

Autopilot Output

To select the desired NMEA sentences (GLL, VTG,BWC, WCV, APA, APB, HDG, BOD, XTE, RMA,
RMB, RMC,GGA, HSC) to send from Autopilot Output Port. All sentences have default On.

'MENU' + "ADVANCED SETUP" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' + "AUTOPILOT OUTPUT" +
'ENTER'

„

„

„

„

„

 Azimuth

The angular measurement from the horizon to a satellite or another object.

Bathymetric Lines

Turns On/Off the displaying of Bathymetric Lines (imaginary lines connecting points of equal water
depth). The default setting is On.

'MENU' +  "MAP SETUP" + 'ENTER' + "MARINE SETTINGS" + 'ENTER' + "BATHYMETRIC LINES" +
'ENTER'

Bath & Sndgs Min/Max = Bathymetr. & Soundings Min/Max

Sets the min/max value for Bathymetrics and Soundings. If the depth unit is Meters (Mt), the range is
[0 - 12000], if  Feet (Ft)  is [0 - 39369], if Fathom (FM) is [0 - 6593].  The default setting is [0, 10] Mt.

'MENU' +  "MAP SETUP" + 'ENTER' + "MARINE SETTINGS" + 'ENTER' + "BATH & SNDGS MIN/MAX" +
'ENTER'

„

„

„

„

„

 Beacon

A prominent, specially constructed object forming a conspicuous vertical mark as a fixed aid to
navigation.

Bearings

Selects either degrees magnetic, Mag, or  True. If magnetic readings are selected the variation is
computed automatically for every zone as soon as the chart is displayed. The default setting is  Mag.

'MENU' +  "ADVANCED SETUP" + 'ENTER' + "COMPASS" + 'ENTER' + "BEARINGS" + 'ENTER'

„

„

„

„

„

 BRG = Bearing

It is the angle between the North (True or Magnetic) and a destination. It represents the direction to
follow.

Bottom Type

Turns On/Off the displaying of Bottom Type (type, colour and other qualities of seabed). The default
setting is On.

'MENU' + "MAP SETUP" + 'ENTER' + "MARINE SETTINGS" + 'ENTER' + "BOTTOM TYPE" + 'ENTER'

„

„

„

„

„

 Buoy

A floating object moored to the sea bottom in a particular (charted) place, as an aid to navigation.

Buoys & Beacons

Turns On/Off the displaying of Buoys and Beacons (buoys and beacons are used to indicate to
mariners recommended or established Routes, underwater dangers, restrictions and regulations.
They can be lighted or not and - for the color chartplotter - are coloured according to their international
code). The default setting is On.

'MENU' + "MAP SETUP" + 'ENTER' + "NAV AIDS SETTINGS" + 'ENTER' + "BUOYS & BEACONS" + 'ENTER'

Calibration

The variation table is used to match magnetic value readout on the chartplotter comparable with the
value given by the compass of the boat. In other words, since the compass of the boat must be
compensated (due to the iron masses, ...), we use the same values given by the chartplotter. This
means that, for example, if the BRG to the next Waypoint readout in the chartplotter display is "X" Mag
degree, if you steer the boat reading "X" Mag degree from the compass, you are driving well toward
the next Waypoint.

'MENU' + "ADVANCED SETUP" + 'ENTER' + "COMPASS" + 'ENTER' + "CALIBRATION" + 'ENTER'

Cart(ographic) Objects

Turns On/Off  the displaying of Cartographic Objects. The default setting is On.

'MENU' + "MAP SETUP" + 'ENTER' + "OTHER SETTINGS" +'ENTER' + "CART. OBJECT" + 'ENTER'

Содержание CP150


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды