Standard Horizon 30143X3D, Руководство пользователя

Страница: 67 / 100

Page 67 GX3000S
12.14 FOG ALERT TONE FREQUENCY
This selection allows you to select the Alert Tone Frequency for the PA/FOG
Operation. Available selections are “200 Hz” through “850 Hz” in 50 Hz steps.
The default Alert Tone Frequency is 400 Hz.
1. Press and hold down the [ CALL
(
MENU
)] key until
“ Radio Setup ” menu appears.
2. Press the [ ENT
] key, then select “
FOG Freq. ” in the
“
Radio Setup
” menu with the CHANNEL selector
knob.
3. Press the [ ENT
] key.
4. Turn the CHANNEL selector knob to select desired
tone frequency.
5. Press the [ ENT
] key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [ 16/9
] key.
12.15 RECEIVER AUDIO RESPONCE
This selection allows you to select the receiver audio responce to allow the
most comfortable and/or effective reception in noisy enviroments. The effect is
similar to that provided by an “Equalizer” in a stereo.
1. Press and hold down the [ CALL
(
MENU
)] key
until “ Radio Setup ” menu appears.
2. Press the [ ENT
] key, then select “
TONE CONT. ”
in the “ Radio Setup ” menu with the CHAN-
NEL selector knob.
3. Press the [ ENT
] key, then select “
BASS ” with
the CHANNEL selector knob.
4. Turn the CHANNEL selector knob to select de-
sired audio responce in the lower frequency
range. Available selections are “
–6
” through “ +6 .”
5. Press the [ ENT
] key to store the selected setting.
6. Select “ TREBLE ” with the CHANNEL selector
knob.
7. Turn the CHANNEL selector knob to select de-
sired audio responce in the highr frequency
range. Available selections are “
–6
” through “ +6 .”
8. Press the [ ENT
] key to store the selected setting.
9. To exit this menu and return to radio operation mode press the [ 16/9
] key.
FCC ID: K6630143X3D/IC ID: 511B-30143X3D
Vertex Standard Co., Ltd.