Standard Horizon 30143X3D, Руководство пользователя

Страница: 25 / 100

Page 25 GX3000S
10.4 SIMPLEX/DUPLEX CHANNEL USE
Refer to the VHF MARINE CHANNEL CHART (page 87) for instructions on use
of simplex and duplex channels.
NOTE
All channels are factory-programmed in accordance with International,
Industry Canada (Canada), and FCC (USA) regulations. Mode of opera-
tion cannot be altered from simplex to duplex or vice-versa.
10.5 INTERNATIONAL, USA, AND CANADA MODE
1. To change the modes, hold the [ 16/9
] key and press the [
WX
] key. The
mode changes from International to Canadian to USA with each press of
the [
WX
] key.
2. “ INTL ” will be displayed for International mode, “ CAN ” will be displayed for
Canadian mode, and “ USA ” will be displayed on the LCD for USA mode.
3. Refer to the VHF MARINE CHANNEL CHART (page 87) for allocated chan-
nels in each mode.
10.6 NOAA WEATHER CHANNELS
NOTE
NOAA Weather channels are available in the waters of USA and Canada only.
1. To receive a NOAA weather channel, press the [ WX
] key from any channel.
The transceiver will go to the last selected weather channel.
2. Turn the CHANNEL selector knob on the radio or [ UP
( )] / [
DOWN
( )]
keys on the microphone to select a different NOAA weather channel.
3. To exit from the NOAA weather channels, press the [ WX
] key. The trans-
ceiver returns to the channel it was on prior to a weather channel.
10.6.1 NOAA Weather Alert
In the event of extreme weather disturbances, such as storms and hurricanes,
the NOAA (National Oceanic and Atmospheric Administration) sends a weather
alert accompanied by a 1050 Hz tone and subsequent weather report on one of
the NOAA weather channels. When the Weather Alert feature is enabled (see
section “
12.10 WX ALERT ”), the transceiver is capable of receiving this alert if
the following is performed:
1. Program NOAA weather channels into the transceiver’s memory for scan-
ning. Follow the same procedure as for regular channels under section “ 10.12
SCANNING .”
2. Press the [ SCAN
(
MEM
)] key once to start memory scanning or priority scan-
ning (determined from the “ Radio Setup ” selection, see page 59 for details).
FCC ID: K6630143X3D/IC ID: 511B-30143X3D
Vertex Standard Co., Ltd.