manualshive.com logo in svg

Standard Communications mt930b, Руководство по обслуживанию, Страница: 152 / 155

Поделиться
Скачать
Standard Communications mt930b Скачать руководство пользователя страница 152

Standard Communications Corp.

Satellite & Broadband Products Division

 

Limited Warranty

Standard Communications Corp. (SCC) warrants, to the original purchaser (the "Purchaser") only, that
each new Satellite & Broadband product will be free from defects in materials and workmanship under
conditions of normal use and service for a period of one (1) year from the date of delivery to the Purchaser.
SCC's liability under this warranty shall be limited to repair or replacement of the defective product, at
SCC's option, and under no circumstances shall SCC be liable for consequential, incidental or other
damages arising out of or in any way connected with a failure of the product to perform as set forth herein.

THIS LIMITED WARRANTY EXTENDS ONLY TO THE PURCHASER AND IS IN LIEU OF ALL OTHER
EXPRESS OR IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.

In the event of a defect, malfunction, or failure of the product to conform to specifications during the
one-year warranty period, SCC will repair or replace, at its option and without charge to the Purchaser, the
product which upon examination by SCC shall appear to be defective or not up to factory specifications.
SCC will pay all labor charges incurred in providing such warranty service.  To obtain warranty service, the
Purchaser must first obtain a repair order (R.O.) number from SCC.  The defective product must then be
returned to SCC freight prepaid.  SCC will examine the product and respond to the Purchaser in
approximately four (4) weeks from the date of receipt of the product claimed to be defective.

This limited warranty does not extend to any product which has been subjected to misuse, neglect, acci-
dent, improper installation, or subject to use in violation of the maintenance or operating instructions, if any,
furnished by SCC; nor does this warranty extend to products on which the serial number has been
removed, defaced, or changed.

SCC reserves the right to make changes or improvements to its products during subsequent production,
without incurring the obligation to install such changes or improvements on previously manufactured or sold
products.

This warranty gives you specified legal rights that vary from state to state.  Because some states do not
allow limitations on the duration of the warranty, or exclusions or limitations of incidental or consequential
damages, these limitations or exclusions may not apply to you.

Содержание mt930b




























































































































































Отзывы:

Нет отзывов