Standalone DSP Скачать руководство пользователя страница 58

Страница: 58 / 89

RECORD : ALARM SETUP

This setup screen allows the operator to configure alarm input activated recording.

PARAMETER

: Recording settings for each channel can be defined across a 24 hour period,

in blocks (for example between 09:00 and 18:00) or for each individual hour.

Note that when SCHEDULE MODE is set to WEEKLY, each day of the week can also be
selected.

SCHEDULE

: This section determines at what times the DVR will monitor the alarm inputs and activate

recording.

Please refer to Timer / motion setup on page 52 for details on setting up PARAMETER and
SCHEDULE.

Alarm activated recording can be used in conjunction with timer / motion recording.

For example, the DVR could be configured to record continuously at a low frame rate (set in timer /
motion setup) and then increase to a higher frame rate during an alarm input (set in alarm setup)

RECORD MENU

Click the

ALARM SETUP

menu.

The setting is same as TIMERMOTION SETUP.

Содержание DSP


























































































Результаты поиска

Содержание DSP

Отзывы:

Standalone DSP, Руководство пользователя, Страница: 58 / 89

Результаты поиска

Содержание DSP

Отзывы: