STORAGE
To store the
INTONE Folding Recumbent Bike
simply keep it in a clean dry place.
The minimum folded dimensions of
INTONE Folding Recumbent Bike
are approximately 21 5/8" long
x 25 3/8" wide x 42 1/4" tall. Please measure your
INTONE Folding Recumbent Bike
if exact dimensions
are needed.
The
INTONE Folding Recumbent Bike
has a pair of
MOVING WHEELS(48)
built into the
FRONT
STABILIZER(4)
at the front. Grasp the
HANDRAIL(7),
tip the
INTONE Folding Recumbent Bike
forward slowly roll into or out of the storage area.
To avoid damage to the
METER(32),
remove the batteries before storing the
INTONE Folding
Recumbent Bike
for one year or more.
Follow the illustrated process below to fold the
INTONE Folding Recumbent Bike.
1.
2.
3.
4.
5.
Loosen the
LOCKING KNOB(45).
Lift up the
BACK SUPPORT(6)
and fold it forward. Tighten the
LOCKING KNOB(45)
after folding.
Remove the
PULL PIN(47)
from the
REAR FRAME(2).
Fold the
REAR FRAME(2)
close to the
MAIN
FRAME(1)
and lock it in folded position with the
PULL PIN(47).
NOTE:
B
12
D
A
C
Loosen and pull the
ADJUSTMENT KNOB(41),
then lower the
SEAT FRAME(5)
to the lowest position.
Lock the
SEAT FRAME(5)
in position by releasing and re-tightening the
ADJUSTMENT KNOB(41).
Swing the
METER(32)
down toward the floor as ahown in illustration D.
a.
b.
Make sure the
LOCKING PIN(47)
go through the holes at both sides of the
REAR FRAME(2)
and the ring on the
MAIN FRAME(1).
NOTE:
c.
If you unfold the
INTONE Folding Recumbent Bike
from the folded position as shown illustration
C, the seat hight and the angle of the
METER(32)
will remain as you have them adjusted for your
workout. You can fold your
INTONE Folding Recumbent Bike
even smaller by following Step
C; however you seat height and meter angle will need to be re-adjusted before your next workout.
Содержание INTONE 15-0200
Страница 16: ...PRODUCT PARTS DRAWING BACK FRONT 16...
