ASSEMBLY INSTRUCTIONS
7
STEP 1
Attach the
FRONT STABILIZER(2),
the short one with the
WHEELS(52),
to the front of the
FRONT FRAME(1)
with
CARRIAGE BOLTS(M8x1.25x75mm)(57), ARC WASHERS(M8)(77), LOCK WASHERS(M8)(80),
and
ACORN NUTS(M8x1.25)(75).
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please call
our toll-free number for assistance 1-800-375-7520 or e-mail us at [email protected].
STEP 2
Attach the
REAR STABILIZER(4),
the one with the
LEVELING CAPS(53),
to the
REAR FRAME(3)
with
CARRIAGE BOLTS(M8x1.25x75mm)(57), ARC WASHERS(M8)(77), LOCK WASHERS(M8)(80),
and
ACORN NUTS(M8x1.25)(75).
STEP 3
Screw the
STAND(54)
all the way up into the bottom of the
FRONT FRAME(1)
.
Connect the
REAR
EXTENSION WIRE(38)
to the
FRONT EXTENSION WIRE(37)
. Insert the
REAR FRAME(3)
into the
FRONT
FRAME(1)
and secure with
BUTTON HEAD BOLTS(M10x1.5x15mm)(59), ARC WASHERS(M10)(78),
WASHERS(M10)(83),
and
LOCK WASHERS(M10)(81).
NOTE:
See page 11 for detailed leveling instructions to prevent rocking.
Содержание fusion 15-4545
Страница 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK...
Страница 21: ...21 NOTES...
