11
SET UP INSTRUCTIONS
Place the
Magnetic Fusion 4545 Bike
in the area where it will be used. It is recommended that the
Magnetic
Fusion 4545 Bike
be placed on an equipment mat. The
Magnetic Fusion 4545 Bike
is approximately 57 3/4
inches long x 24 3/8 inches wide x 43 3/4 inches tall (max.). (These dimensions may vary up to one inch.)
An area 4 feet wide x 7 feet long is required for safe operation of the
Magnetic Fusion 4545 Bike.
Make
sure that adequate space is available for access to and passage around the
Magnetic Fusion 4545 Bike.
Adjust the
STAND(54)
under the
FRONT FRAME(1)
and the
LEVELING CAPS(53)
on the
REAR STABILIZER(4)
so that the Bike sits on the floor without rocking. Remove and reposition
the
LEVELING CAPS(53)
on the
REAR STABILIZER(4)
to level the
Magnetic Fusion 4545
Bike.
The
Magnetic Fusion 4545 Bike
has a pair of
WHEELS(52)
on the
FRONT STABILIZER (2).
Lift up from
REAR STABILIZER(4)
to move the
Magnetic Fusion 4545 Bike.
LEVELING:
MOVING:
To level the
Magnetic Fusion 4545 Bike,
first screw the
STAND(54)
located in the middle of the
FRONT
FRAME(1)
all the way up into the
FRONT FRAME(1)
so that it is not touching the floor.
Adjust the two
LEVELING CAPS(53)
on the
REAR STABILIZER(4).
When the
LEVELING CAPS(53)
are adjusted and
the
Magnetic Fusion 4545 Bike
is stable, rotate the
STAND(54)
to make it contact with the floor.
While you are adjusting the
LEVELING CAPS(53)
the
STAND(54)
must not be in contact with the floor.
Only after the
Magnetic Fusion 4545 Bike
has been stabilized with the
LEVELING CAPS(53)
will you
position the
STAND(54)
so it is in contact with the floor to provide extra stability for the frame.
EQUIPMENT MAT
(not included)
Down Button(43)
Up Button(42)
FUNCTION INSPECTION:
Visually inspect the
Magnetic Fusion 4545 Bike
to verify that assembly is as shown in the above illustration.
Check the function of the
Magnetic Fusion 4545 Bike
by turning the crank slowly through one complete
revolution to verify that the drive train functions properly. Press the
UP
and
DOWN BUTTONS(42, 43)
on
the ends of the
HANDRAILS(6)
to verify that the adjustable tension is working properly.
Locate and read the
WARNING LABEL(85)
on the
Magnetic Fusion 4545 Bike.
Make sure
that all users read the
WARNING LABEL(85).
CAUTION:
Содержание fusion 15-4545
Страница 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK...
Страница 21: ...21 NOTES...
