background image

TABLE OF CONTENTS

Safety Instructions ......................................  2

Before You Begin ........................................  4

Equipment Warning, Caution & Notice Labels ... 5

Hardware Identification Chart ....................  6

Assembly Instructions ................................ 7

Operational Instructions ........................... 12

Maintenance ............................................... 13

Storage .......................................................  14

Conditioning Guidelines ........................... 15

Warm-Up and Cool-Down .........................  16

Warranty .....................................................  17

Product Parts Drawing .............................. 18

Parts List ....................................................  19

Notes ........................................................... 21

Fax/Mail Ordering Form ............................  22

SAFETY INSTRUCTIONS

2

1.  Save these instructions and ensure that other exercisers read this manual prior to using the 

BodyTrac 

Glider 1060 

for the first time.

2.  Read all warnings and cautions posted on the 

BodyTrac Glider 1060.

3.  The 

BodyTrac Glider 1060

 should only be used after a thorough review of the Owner’s Manual. Make sure that 

it is properly assembled and tightened before use.

4.  We recommend that two people be available for assembly of this product.

5.  Keep children away from the 

BodyTrac Glider 1060.

 Do not allow children to use or play on the 

BodyTrac 

Glider 1060.

 Keep children and pets away from the 

BodyTrac Glider 1060 

when it is in use.

6.  It is recommended that you place this exercise equipment on an equipment mat.

7.  Set up and operate the 

BodyTrac Glider 1060

 on a solid level surface. Do not position the 

BodyTrac Glider 

1060

 on loose rugs or uneven surfaces.

8.  Make sure that adequate space is available for access to and around the 

BodyTrac Glider 1060.

9.  Keep fingers clear of all pinch points when folding and unfolding the 

BodyTrac Glider 1060.

10. Before using, inspect the 

BodyTrac Glider 1060

 for worn or loose components, and securely tighten or replace 

any worn or loose components prior to use.

11.  Before using, always check the Extension Arms(14) are securely tightened with the Locking Knob(13).

12. Shocks on steppers/rowers get HOT during use. To avoid burns, do not touch the shocks until they have time to 

cool.

13. Consult a physician prior to commencing an exercise program and follow his/her recommendations in 

developing your fitness program. If at any time during exercise you feel faint, dizzy, or experience pain, stop and 

consult your physician.

14. Always choose the workout which best fits your physical strength and flexibility level. Know your limits and train 

within them. Always use common sense when exercising.

15. Do not wear loose or dangling clothing while using the 

BodyTrac Glider 1060.

16. Never exercise in bare feet or socks; always wear proper footwear such as running, walking, or cross training 

shoes that fit well, provide foot support, and feature non-skid rubber soles.

17. Be careful to maintain your balance while using, mounting, dismounting, or assembling the 

BodyTrac Glider 

1060,

 loss of balance may result in a fall and bodily injury.

18. Do not use the seat to move the 

BodyTrac Glider 1060.

 The Seat will move and the Seat Carriage may pinch 

your hand or fingers.

19. The 

BodyTrac Glider 1060

 should not be used by persons weighing over 250 pounds.

20. The 

BodyTrac Glider 1060

 should be used by only one person at a time.

21. The 

BodyTrac Glider 1060

 is for consumer use only. It is not for use in public or semipublic facilities.

!

  WARNING

This product contains a chemical known to the State of California to cause 

cancer and birth defects or other reproductive harm.

 Consult your physician before starting this or any exercise program. This is 

especially important if you are over the age of 35, have never exercised before, 

are pregnant, or suffer from any health problem. This product is for home use 

only. Do not use in institutional or commercial applications. Failure to follow all 

warnings and instructions could result in bodily injury and property damage.

 To reduce the risk of serious injury, read the following Safety Instructions 

before using the BodyTrac Glider 1060.

!

  WARNING

!

   CAUTION

Содержание BODYTRAC GLIDER 1060























Отзывы: