Stamina AVARI Free Motion Rower, Руководство пользователя

Страница: 13 / 22

LOAD ADJUSTMENT
The resistance of the shocks can be adjusted by twisting the adjustment
knob at the top of the shocks. There are settings from 1 to 12. Setting
#1 will provide the lowest resistance. Setting #12 will provide the highest
resistance.
CAUTION: The shocks get HOT after a few minutes of use.
Adjustment
Knob
Mark
OPERATIONAL INSTRUCTIONS
The safety and integrity designed into the AVARI® Free Motion Rower can only be maintained when the
AVARI® Free Motion Rower is regularly examined for damage and wear. Special attention should be
given to the following:
1. Pull on the HANDLEBARS(17, 18) and verify that the SHOCK(22) provides tension.
2. Clean the roller tracks in the CENTER BEAM(1) with an absorbent cloth.
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
4. Verify that the CAUTION LABEL(62) is in place and easy to read. Call Stamina Products immediately
at
1-800-375-7520
for a replacement
CAUTION LABEL(62)
if it is missing or damaged.
5. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
6. Worn or damaged components shall be replaced immediately or the AVARI® Free Motion Rower
removed from service until repair is made.
7. Only Stamina Products supplied components shall be used to maintain/repair the AVARI® Free
Motion Rower.
8. Keep your AVARI® Free Motion Rower clean by wiping it off with an absorbent cloth after use.
MAINTENANCE
13