ASSEMBLY INSTRUCTIONS
STEP 7:
Push the
PEDALS(35, 36)
to the same height, so the
SLIDING TUBES(30)
come out as
shown in the following illustration. Insert the
HANDLEBARS(25, 26)
in the
SLIDING TUBES(30)
and
lock in the desired position with the
ADJUSTMENT KNOBS(28).
NOTE:
Make sure to always adjust both
HANDLEBARS(25, 26)
to the same height. The pin of
the
ADJUSTMENT KNOBS(28)
must be inserted into one of the adjustment holes in the
HANDLEBARS(25, 26)
and the
ADJUSTMENT KNOBS(28)
must be screwed in tight to ensure
that the
HANDLEBARS(25, 26)
will fit securely in the
SLIDING TUBES(30).
STEP 8:
Insert the
RIGHT LOWER HANDRAIL(42)
into the
RIGHT UPPER HANDRAIL(40)
and
secure with
BUTTON HEAD BOLT(M8x1.25x16mm)(98). Do not securely tighten the Bolt(98).
Slide
the
HANDRAIL ASSEMBLY(40, 42)
to the
HANDRAIL SUPPORTS(46, 56)
and secure with
BUTTON
HEAD BOLTS(M8x1.25x16mm)(98). Securely tighten all three Bolts(98).
Repeat on the left side.
STEP 9:
Use your hand or a simple tool to pry the
METER(48)
from the
FRONT COVER(50).
Install
two AAA batteries into the
METER(48),
the batteries are not included. See page 13 for detailed battery
installation instructions. Push the
METER(48)
back to the
FRONT
COVER(50).
Be careful not to damage
the wires when attaching the
METER(48).
10
Содержание 55-2125
Страница 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK ...
Страница 21: ...NOTES 21 ...
