13
OPERATIONAL INSTRUCTIONS
Loosen the
QUICK RELEASE(82)
by opening the Lever on the
QUICK RELEASE(82)
.
Press
the
BUTTON
PIN(22)
and hold it down, then pull
the
HANDLEBAR ASSEMBLY(5)
to remove.
STANDING WORKOUT
Using the
InMotion® Compact Strider Pro
while standing exercises your core and other muscles. If you have good
balance and are familiar with the elliptical, you may use the
InMotion® Compact Strider Pro
while standing. Always
mount and dismount the elliptical from the lowest foot pedal (as shown below). Stand on the foot pedals with the
front of your shoes close to the front edge of the pedal cap. For more stability, place a chair next to the
InMotion®
Compact Strider Pro
and place your hand on the chair back while stepping onto the pedals. Move your highest foot
forward and follow the natural path of the machine. If necessary, use a wall or table to help maintain your balance
while using the
InMotion® Compact Strider Pro.
USING THE InMotion® Compact Strider Pro WITHOUT THE HANDLEBAR
SITTING WORKOUT
Refer to the illustrations below. Seated workouts are effective for toning legs and hips, and for improving circulation
and mobility. When sitting, your feet will face the opposite direction on the pedals than when standing. This will
put your feet, ankles, and hips at the proper workout angles. To adjust the
METER(24)
to face you, find the two
cavities on either side of the meter case, grasp the
METER(24)
and pull it out from the casing being careful not to
disconnect or damage the
SENSOR WIRE(30).
Turn the meter 180 degrees, and push it back into position.
Place the
InMotion® Compact Strider Pro
on the floor in front of a chair. Sit in the chair and place your feet in the
PEDAL CAPS(53, 41)
as shown in the illustration below, or place your feet on the end of the
PEDAL CAPS(53, 41)
as shown in detail view B. Pedal the
InMotion® Compact Strider Pro
with your feet.
CAUTION:
Do not stand up on the
InMotion® Compact Strider Pro
in this workout position.
Cavity
B.
Lever
Содержание 55-1631
Страница 3: ......
Страница 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK...
Страница 21: ...NOTES 21...