ASSEMBLY INSTRUCTIONS
11
STEP 11:
Insert the upper end of the
HANDRAIL(35)
into the
FRONT FRAME(1)
and secure with
BUTTON HEAD BOLTS(M8x1.25x25mm)(47)
and
ARC WASHER(M8)(62). Do no tighten the
bolt.
Attach the lower end of the
HANDRAIL(35)
to the
REAR FRAME(2)
with
BUTTON HEAD
BOLTS(M8x1.25x15mm)(46), BUTTON HEAD BOLTS(M8x1.25x50mm)(49),
and
ARC WASHER(M8)
(62).
Tighten the
BUTTON HEAD BOLTS(M8x1.25x25mm)(47).
Repeat on other side.
STEP 12:
Pull the
ADJUSTMENT KNOB(23)
and insert the
LEG ADJUSTMENT FRAME(12)
into the
SWING BAR(11).
Align the holes on the
LEG ADJUSTMENT FRAME(12)
and the
SWING BAR(11).
Then insert the
ROUND HEAD BOLT(M6x1x15mm)(43)
through the
SWING BAR(11)
and bolt into the
LEG ADJUSTMENT FRAME(12).
NOTE:
The pin on the
ADJUSTMENT KNOB(23)
must be inserted into one of the adjustment holes in
the
LEG ADJUSTMENT FRAME(12).
The
ADJUSTMENT KNOB(23)
should be screwed in tight
to make the
LEG ADJUSTMENT FRAME(12)
fit securely in the
SWING BAR(11).
STEP 13:
Slide the
FOAM PADS(20)
onto both sides of the
LEG ADJUSTMENT FRAME(12)
and the
LEVER(13).
Press the
ROUND PLUGS(41)
into the round tubes on the
LEG ADJUSTMENT FRAME(12)
and the
LEVER(13).
Содержание 55-1541A
Страница 16: ...PRODUCT PARTS DRAWING 16 BACK FRONT...
Страница 20: ...NOTES 20...
Страница 21: ...NOTES 21...
