STEP 10:
Slide the
LEFT
and
RIGHT PROTECTIVE COVERS(26, 27)
onto each side of the
BASE
ASSEMBLY.
Make sure the
SHAFTS
on the
FRONT FRAME(1)
poke out through the hole on the
PROTECTIVE COVERS(26, 27).
NOTE:
Do not secure the
PROTECTIVE COVERS(26, 27)
to the
FOLDING LINKAGES(3)
with the
SECURING STRAPS
on the covers until
STEP 12.
ASSEMBLY INSTRUCTIONS
Shaft
Shaft
10
Nylon Bed
(10) Handrail
(10) Handrail
LEFT
RIGHT
STEP 13:
Verify that the handlebars function correctly before using the
Therapy Inversion System.
Move the Nylon Bed on the
MAIN FRAME(4)
backward toward the inverted position. The
HANDRAILS(10)
must move forward as the
MAIN FRAME(4)
moves backward. If the
HANDRAILS(10)
do not move forward
check
ASSEMBLY STEPS 2, 11, and 12.
STEP 11:
Attach the
LINKAGE(7)
onto the
LEFT
HANDRAIL ASSEMBLY(8)
with the
LOCKING KNOB(11).
Slide the
LEFT
HANDRAIL ASSEMBLY(8)
onto the
SHAFT
in the
FRONT FRAME(1)
and secure in position
with the
LOCKING KNOB(11).
Repeat on other side.
STEP 12:
Attach the
LINKAGES(7)
onto the
LEFT
and
RIGHT PIVOT ARMS(5, 6)
with
BOLTS
(M8x1.25x25mm)(46), WASHERS(M8)(51),
and
NYLOCK NUTS(M8x1.25)(49). DO NOT OVER TIGHTEN
THE BOLTS.
Pull the
PROTECTIVE COVERS(26, 27)
down until the bottom of the covers are slightly lower
than the
FOLDING LINKAGES(3).
Secure the
PROTECTIVE COVERS(26, 27)
to the
FOLDING LINKAGES
with the
SECURING STRAPS
on the covers.
NOTE:
When the
PROTECTIVE COVERS(26, 27)
are assembled correctly the
FOLDING LINKAGES(3)
should not be visible.
Содержание 55-1539A
Страница 14: ...PRODUCT PARTS DRAWING BACK FRONT 14 ...
Страница 18: ...NOTES 18 ...