Stamina 55-1538, Руководство пользователя

Страница: 13 / 18

13
STORAGE
FOLDING THE INVERSION TABLE
The
Gravity Inversion Table
can be easily folded for storage.
To fold the
Gravity Inversion Table
loosen
LOCKING KNOB(19)
and pull out the
LARGE SPRING
PIN(18).
Now, slide the
HEIGHT ADJUSTMENT BEAM(6)
all the way up into the
MAIN FRAME(4)
until the
ADJUSTABLE INSTEP FRAME(7)
is just below the
MAIN FRAME(4),
release the
LARGE
SPRING PIN(18)
and slide the
HEIGHT ADJUSTMENT BEAM(6)
slightly up or down until the spring
pin locks the beam in place. Remove the
MAIN FRAME ASSEMBLY
from the
BASE
by lifting up on the
MAIN FRAME(4)
until the
PIVOT ARMS(5)
come out of the slots located at the top of the
REAR
FRAME(2),
(Make sure the
NYLON STRAP
is not attached to the
MAIN FRAME(4)
before attempting
to remove it.) Push up on the center of the
FOLDING LINKAGES(3)
and push the
FRONT FRAME(1)
and
REAR FRAME(2)
together until they meet.
MAINTENANCE INSTRUCTIONS
The safety level of the
Gravity Inversion Table
can be maintained only if it is examined regularly for
damage and wear.
Check the warning label, nylon strap, strap buckle, pivot arms, nylon bed, heel holders, small spring pin
and large spring pin for damage and wear.
Replace damaged and worn components immediately and/or keep the equipment out of use until repairs
are completed. 1.
2.