Stamina 55-1537C, Руководство пользователя

Страница: 14 / 22

OPERATIONAL INSTRUCTIONS
SUGGESTIONS FOR USE
Begin slowly: invert with the least amount of inversion angle to begin with. Stay inverted only as long as
you are comfortable. Return upright slowly.
Make gradual changes: increase the angle only if it is comfortable. Increase the angle only one adjustment
hole at a time. Increase the time of use 1-2 minutes up to ten over a period of weeks. Add stretching and
light exercise only after you are comfortable with inversion.
Watch your body: come up slowly, dizziness after a session means you came up to fast. Wait a while
after eating before using table. If you get nauseous, do not fight it, come up as soon as you feel queasy.
Keep moving: movement while inverted encourages blood, lymph, and spinal fluid circulation and aids
in alignment of bones and organs. Movement may be accomplished by either rhythmic traction or light
exercise. Do not exercise strenuously while inverted. Limit partial inversion without movement to one or
two minutes. Limit full inversion with no movement to only a few seconds.
Invert regularly: we recommend two or three times a day depending upon your current condition. Try to
schedule it for the same times each day. 1.
2.
3.
4.
5.
A. B. C.
RECOVERY FROM LOCKED POSITION
To recover from the locked position, simply grab the
HANDRAILS
and pull on them while pushing back on
the
HEEL HOLDERS(15)
with your legs. If you can not reach the
HANDRAILS,
then you can still
recover by grabbing the back of the bed with one hand, the
REAR FRAME
with the other, and pulling your
hands together, as shown in illustration C.
14
LOCKING THE BED
When the inversion table rotates past the vertical inverted position the bed becomes locked, and will not
return to the upright position in the usual way. The locked position allows you to hang straight upside-down
completely free of the bed. This position allows you to enjoy all of the benefits of a handstand, with none of
the discomforts, as shown in illustration A. It also allows you to do exercises such as the waistband, as
shown in illustration B.
To get into the locked position, use the top hole in the
PIVOT ARMS(6)
as described in
STEP 3.
If necessary, adjust the
HEIGHT ADJUSTMENT BEAM(10)
shorter, and then mount and use normally.
When your arms are completely extended above your head, the bed will rotate all the way to the locked
position.
CAUTION:
You must understand how to recover from the fully inverted position before using the fully
inverted position. Read the
RECOVERY FROM LOCKED POSITION
section below
BEFORE
using the fully inverted position.