background image

When calling for parts or 

service, please specify 

the following number

 

:

Model#: 55-1527, 

55-1527B,

55-1527C

WARNING:  The Buckle Strap and the Nylon Strap must be 

attached and properly adjusted at all times during 

use of this product.

This Product is Distributed Exclusively by

2040  N.  Alliance,  Springfield,  MO 65803

Customer Service

1 (800) 375-7520

www.staminaproducts.com

Product May Vary Slightly From Pictured.

STAMINA PRODUCTS

MADE IN CHINA

© 

2011 Stamina Products, Inc.

2011, 03

Exercise  can  present  a 

h e a l t h  r i s k .  C o n s u l t  a 

physician  before  beginning 

any  exercise  program  with 

this  equipment.  If  you  feel 

faint  or  dizzy,  immediately 

discontinue  use  of  this 

equipment.  Serious  bodily 

injury  can  occur  if  this 

equipment is not assembled 

and used correctly. Serious 

bodily injury can also occur 

if  all instructions are not 

followed.  Keep  others  and 

pets  away  from  equipment 

when in use. Always make 

sure  all  bolts  and  nuts  are 

securely  tightened  prior  to 

each use. Follow all safety 

instructions in this manual.

!

  WARNING

Owner's

Manual

READ AND FOLLOW THE WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. 

ANY PREVIOUSLY PROVIDED OWNER’S MANUALS OR INSTRUCTIONAL DVD THAT 

ACCOMPANIED THIS PRODUCT OR CONTAINED HEREIN SHOULD BE DISCARDED AND 

REPLACED WITH THIS UPDATED VERSION. REFER TO PAGE 5 FOR INSTRUCTIONS ON 

WHERE TO AFFIX THE NEW INVERSION WARNING DECAL.

 CAUTION:  Weight on this product should not exceed 250 lbs.

Содержание 55-1527



















Отзывы: