Stamina 40-0046, Руководство пользователя

Страница: 5 / 14

ASSEMBLY INSTRUCTIONS
5
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance
1 (800) 375-7520 or e-mail us at:
parts@staminaproducts.com
STEP 1
Lift up the
LEFT
and
RIGHT PEDAL ARMS(2, 3).
Insert the
PULLEY BRACKET(7)
into the Collar on
the
MAIN FRAME(1).
Wrap the
CABLE(9)
around the
PULLEY(8)
and press the two
PEDAL ARMS
(2, 3)
down. Refer to illustration A.
NOTE: Always make sure that the
CABLE(9)
is properly seated in the groove on the
PULLEY(8)
before
using the
INSTRIDE.
STEP 2
Refer to illustration B. Hook the
RESISTANCE CORDS(32)
onto the Rings in the
LEFT
and
RIGHT
PEDAL ARMS(2, 3).
Install one
" AAA "
battery into the back of the
METER(13),
one battery included. Plug the
SENSOR
WIRE(11)
into the
METER(13),
then slide the
METER(13)
onto the
MOUNTING CAP(12).
NOTE:
COLLAR
A.
B.
RING
1. Please be careful not to damage the
SENSOR WIRE(11)
when attaching the
METER(13).
2. See page 7 for detailed battery installation instructions.