
ASSEMBLY INSTRUCTIONS
9
Nylon Tie
A.
STEP 7
Attach the
METER BRACKET(78)
to the
HANDLEBAR(2)
with
ROUND HEAD SCREWS(M5x0.8x10mm)
(60)
and
ARC WASHER(M5)(79).
STEP 8
Install two AA batteries into the
METER(77),
the batteries are not included. See page 13 for detailed
battery installation instructions. Slide the
METER(77)
onto the
METER BRACKET(78).
STEP 9
Plug the
SENSOR WIRE(76)
into the connecting wire of the
METER(77).
Insert the sensor on the end
of the
SENSOR WIRE(76)
into the
SENSOR CLIP(75).
Find the
MAGNET(74)
on the
FLYWHEEL(23),
adjust the position of the sensor so the gap between the sensor and the
MAGNET(74)
is 1/4” to 1/2” (5mm
to 10mm).
STEP 10
To avoid the sensor wires rub with the
FLYWHEEL(23).
Refer to detail drawing A. Use the enclosed
nylon tie to secure the sensor wires to the
MAIN FRAME(1).
Содержание 15-9300
Страница 18: ...PRODUCT PARTS DRAWING FRONT BACK 18...
Страница 22: ...22 NOTES...