Stamina 15-5125, Руководство пользователя

Страница: 8 / 23

ASSEMBLY INSTRUCTIONS
STEP 6
Turn the
TENSION KNOB(25)
on the
UPRIGHT(4)
clockwise until the cable end extends out of the
metal fitting as far as possible. Pull the ends of the
TENSION CABLE(24)
and
SENSOR WIRE(28)
out
of the
MAIN FRAME(1).
Refer to the inset drawing. Connect the
CABLE END
of the
TENSION
KNOB(25)
into the
SPRING HOOK
on the end of the
TENSION CABLE(24).
Pull on the Cable of the
TENSION KNOB(25)
firmly so that enough cable is available to insert the cable through the slot in the
BRACKET.
Then insert the
METAL FITTING
on the cable of the
TENSION KNOB(25)
into the hole at
the end of the slot in the
BRACKET.
STEP 7
Connect the
CONNECTION WIRE(27)
to the
SENSOR WIRE(28).
Insert the
UPRIGHT(4)
onto the
MAIN FRAME(1)
and secure with
BUTTON HEAD BOLTS(M8 x 20mm)(49), LOCK
WASHERS(M8)(63),
and
ARC WASHERS(M8)(62).
8
CABLE END
SPRING HOOK
BRACKET
METAL FITTING