ASSEMBLY INSTRUCTIONS
R
8
STEP 7
There is a
"R"
decal on the
RIGHT HANDLEBAR(7)
and
RIGHT LINKAGE(74).
Refer to above illustration.
Press a
LINKAGE BUSHING(42)
into the
RIGHT LINKAGE(74).
Attach the
RIGHT LINKAGE(74)
onto the
bottom end of
LOWER BAR(8)
with
HEX HEAD BOLT(M8x1,25x45mm)(61), WASHER
(M8x
ø
22mmx1.5mm)(68), ARC WASHER(M8)(71),
and
NYLOCK NUT(M8x1.25)(62).
STEP 8
Attach the right
LOWER BAR ASSEMBLY(8)
to the
RIGHT HANDLEBAR(7)
with
ROUND HEAD BOLTS
(M6x1x12mm)(59)
and
ARC WASHERS(M6)(70).
Repeat
STEP 7
and
STEP 8
to assemble the
LEFT
HANDLEBAR(6).
STEP 9
Slide the
AXLE(36)
through
BUSHINGS(37)
into the
MAIN FRAME(1).
Slide the two
BUSHING WASHERS
(38)
onto both sides of the
AXLE(36).
Slide the
LEFT
and
RIGHT HANDLEBARS(6, 7),
with the
GRIPS
facing outside, onto
AXLE(36)
and fasten with
LARGE WASHERS(M8)(39)
and
NYLOCK NUTS(M8x1.25)
(62).
Place a
NUT CAP(40)
onto the
NYLOCK NUT(M8x1.25)(62)
on both sides.
STEP 10
Slide the two
FOAM GRIPS(41)
onto the
LEFT
and
RIGHT
HANDLEBARS(6, 7).
NOTE:
R
Lubricate the
LEFT
and
RIGHT HANDLEBARS(6, 7)
with a small amount of liquid soap for easier
installation of the
FOAM GRIPS(41).
L
L
Содержание 15-0960
Страница 20: ...PRODUCT PARTS DRAWING BACK FRONT 20...
