The safety and integrity designed into the
Folding Upper & Lower Body Cycle
can only
be maintained when the
Folding Upper & Lower Body Cycle
is regularly examined for
damage and wear. Special attention should be given to the following:
1. A light oil is applied to the pedals of your
Folding Upper & Lower Body Cycle
before shipping. Reapply oil if the pedals begin squeaking.
2. Verify that all nuts and bolts are present and properly tightened. Replace missing
nuts and bolts. Tighten loose nuts and bolts.
3. Verify that the
CAUTION LABEL(26)
is in place and easy to read. Call Stamina
Products immediately at
1-800-375-7520
for a replacement
CAUTION LABEL(26)
if
it is missing or damaged.
4. It is the sole responsibility of the user/owner to ensure that regular maintenance is
performed.
5. Worn or damaged components must be replaced immediately or the
Folding Upper
& Lower Body Cycle
removed from service until repair is made.
6. Only Stamina Products supplied components should be used to maintain/repair the
Folding Upper & Lower Body Cycle.
7. Keep your
Folding Upper & Lower Body Cycle
clean by wiping it off with an
absorbent cloth after use.
1. To store the
Folding Upper & Lower Body Cycle,
simply keep it in a clean dry
place.
2. The minimum folded dimensions of the
Folding Upper & Lower Body Cycle
are
approximately 16.4" long x 14.4" wide x 5.6" tall. Please measure your
Folding
Upper & Lower Body Cycle
if exact dimensions are needed.
3. To move the
Folding Upper & Lower Body Cycle,
lift the unit by the upright of the
MAIN FRAME(1).
Caution:
Make sure that the hub on the
MAIN FRAME(1)
has cooled before moving.
4. To fold, refer to illustration A, remove the
LOCKING KNOB(15),
and fold the
FRONT
FRAME(2)
to the
MAIN FRAME(1).
Reattach the
LOCKING KNOB(15)
to the
FRONT FRAME(2).
The
Folding Upper & Lower Body Cycle
should appear as
shown in illustration B after folded.
Storage
Maintenance
4
A.
B.
