Assembly and Operational Instructions
3
USING THE ELECTRONIC TIMER
1. To time your workout, begin by pressing and holding the
button on the face of the timer until zeros are displayed.
Release the button.
2. Start the timer by pressing and releasing the button. Now
you are ready to begin your workout.
3. To stop or pause the timer, press and release the timer button. This freezes the
workout time. To resume your workout without losing the time displayed before
stopping or pausing, press and release the button again.
4. When you complete your workout, press and release the timer button. The timer will
automatically turn off after being in stop or pause mode for 4 minutes.
TIMER Function:
The electronic timer displays minutes and
seconds up to 99:59.
BATTERY:
The electronic timer operates with a 3V CR2032 button cell battery,
included. Replace the battery when you see inconsistencies in the display.
NOTE:
Even after the timer automatically turns off, the time that was displayed prior to
shut off will remain in memory. To resume your workout without losing the time
displayed before stopping, press and release the timer button. To clear the time
and start a new workout, start again at step 1.
HOW TO INSTALL AND REPLACE BATTERY:
1. Remove the TIMER(20) from the
Folding Upper &
Lower Body Cycle.
Place the TIMER(20) up-side
down as shown in the illustration.
2. Refer to the illustration. Remove the old battery.
3. Install a new button cell battery. Assemble the
TIMER(20) back to the
Folding Upper & Lower Body
Cycle.
CR2032
Battery
Pinch here to
release the
battery.
1
. Ultimate disposal of battery should be handled
according to all state and federal laws and
regulations.
2. Do not dispose of batteries in fire.
NOTE:
