- 2 -
HOLDING THE READING
4.3.
Pressing of the [HOLD] button once will hold the reading on screen The „HOLD” icon will continue to flash.
1.
Pressing the [HOLD] button for the second time will bring the device back to the real-time measurement mode.
2.
MAXIMUM/MINIMUM READING MEMORY
4.4.
Pressing the [MAX/MIN] button once presents the maximum reading on the display. The „MAX” icon will continue to
1.
flash.
PPressing the [MAX/MIN] button for the second time presents the minimum reading on the display. The „MIN” icon
2.
continues to flash.
Pressing the button again brings the device back to the constant measurement mode.
3.
*In order to reset the memory, press and hold the [MAX/MIN] button for about 3 seconds.
*Before storing the new max / min reading the device should be reset
REMARKS
4.5.
The probe should be cleaned immediately after each use in order to prevent polluting the food
1.
The device should not be exposed to temperatures higher than 50°C / 122°F or put into an oven
2.
When the MIN/MAX temperature memory function is in use the thermometer cannot be disabled. The thermometer
3.
can only be disabled after the above mentioned functions are disabled.
In case the thermometer does not work properly use a pointed object to press the [RESET] button.
4.
ERROR SYMBOLS
5.
Symbol
Description
Actions to be taken
Battery flat
Replace battery
LLL
1) Sensor damage
1) Bring the thermometer in for repair
2) The reading is lower than the minimum
range of the device (- 50°C)
2) Measure temperature within the range of the
device
HHH
1) Short circuit in the probe
1) Bring in the thermometer for repair
2) The reading is higher than the maximum
range of the device (200°C or 300°C)
2) Measure temperature within the range of the
device
END OF SERVICE LIFE RECYCLING
6.
After the device reached its end-of-service life or when buying new equipment at Stalgast you can return the old device. Send
it to us and a specialized company will recycle it in accordance with the ESOL for Electrical and Electronic Equipment Act
(Legal Journal 2005 no. 180 point 1495).
WARRANTY
7.
The seller provides a warranty for the product.
