- 8 -
EN
Thank you for your purchase of a Stalgast product. Before use please familiarize yourself in detail with the following instruction
manual. Copying of the following manual without the consent of the manufacturer is prohibited. Images and drawings are of
illustrative character and may differ from the purchased product.
Attention
: This manual should be kept in a safe place accessible for personnel. The manufacturer reserves the right to change
the technical characteristics of the product without any notice.
1. SAFETY INSTRUCTIONS
•
Incorrect maintenance and/or use may cause serious harm to people and damage the device.
•
The device can only be used for the purpose for which it has been designed.
•
The manufacturer does not take any responsibility for damages caused by improper maintenance or use of the device.
•
When in use, secure the device and its electrical plug from any contact with water or other fluids. In case the device isac-
cidentally dropped into water the electrical plug should be immediately removed from the socket and the device shouldbe
inspected by a trained professional.
Failure to obey these instructions may cause life threatening danger.
•
Do not make any attempts to repair the device on your own – this may cause life threatening danger.
•
Protect the electrical cord from contact with sharp or hot objects and keep it away from open fire. When you disconnect the
device from the electrical socket always hold the plug and never pull the electrical cord.
•
Secure the electrical cord (or the extension cord), so that it is not unplugged by mistake and so that no one can stumble over it.
•
Monitor functioning of the device while in use.
•
Use of the device by people underage, physically or mentally incapable, with motion disorders as well as people without
proper experience and knowledge regarding the use of this device should not be allowed. All of the above should only use
the device under supervision of a person responsible for their health and safety.
•
When not used or during maintenance you should always unplug the device from the source of electricity by removing the
electrical plug from the socket.
•
ATTENTION:
when the electrical plug is plugged into the socket the device is constantly live.
•
Switch the device off before removing the plug from the socket.
•
Never pull the device by the electrical cord.
•
Do not use any additional elements other than those supplied with the device. Never set the device in the proximity of heat
sources (e.g. stoves or ovens).
2. STRUCTURE OF THE DEVICE
The GN 1/1 electric chafing dish can be used along with 100mm deep GN 1/1 containers. It is designed to maintain the tempera-
ture of food products in GN containers.
1. Temperature control knob
– when water inside the device reaches proper temperature thermostat will disengage heating
elements. When temperature falls more than 10
o
C below the set temperature heating elements will automatically turn on.
When temperature control knob is turned to 85
o
C +/_ 10
o
C steam may be visible around kettles. If the required tempera-
ture is lower turn the control knob down. Temperature is maintained with 10
o
C tolerance.
2. Indicator lights
– the device is equipped with 2 indicator lights. Then it is connected to a source of electricity the indicato-
ron the power switch is on. Activity of heating elements is indicated by an indicator located next to the temperature control
knob.
3. Water level
– the tank should be filled with water up to the level market on the inside of the device, both when used with
GN containers and soup kettles, if the GN container or soup kettles float it means the tank has been overfilled. In case cold
water is used to fill the tank the device should be turned on about 30 minutes before use. Using hot water shortens the time
necessary to prepare this device to work.
Содержание 435130
Страница 11: ......
