STALCO S-97145, Оригинальная инструкция

Страница: 19 / 24

19
/II
TOOL SPECIFICAIONS
Hammer Drill
Rated power input
No-load speed
Concrete
Steel
Wood
Chuck clamping range
Weight
Protection class
(W)
(rpm)
(mm)
(mm)
(mm)
(mm)
(kg)
AS105
550
0-2800
13
10
25
Max. 13
1,7
PL
EN
Original INSTR
UCTION
NOISE/VIBRATION INFORMATION
A weighted sound pressure LpA: 91.7 dB(A)
A weighted sound power LpA: 102.7 dB(A)
K pA & KwA= 3.0 dB(A)
W ear ear protection when sound pressure is over 80 dB(A)
Vibration total values (triax vector sum) determined according to EN 60745:
Impact drilling into concrete:
Vibration emission value ah ID= 15.238 m/s2
Uncertainty K= 1.5m/s2
Drilling into metal:
Vibration emission value ah ID= 4.980m/s2
Uncertainty K= 1.5m/s2
The declared vibration total value may be used for comparing one tool with another,
and may also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant
on the following examples and other variations on how the tool is used:
- How the tool is used and the materials being cut or drilled.
- The tool being in good condition and well maintained.
- The use the correct accessory for the tool and ensuring it is sharp and in good
condition.
- The tightness of the grip on the handles and if any anti vibration accessories are
used.
- And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of
use should also take account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle but not actually doing the job. This may
signicantly reduce the exposure level over the total working period.
- Helping to minimise your vibration exposure risk.
- ALWAYS use sharp chisels, drills and blades
- Maintain this tool in accordance with these instructions and keep well lubricated