background image

7

2

27/04/2022  Rev:1.0.0 

English

4 - SAFETY FEATURES

WARNING

The  manufacturer  declines  any  form  of  responsibility  or  guarantee  if  the  purchaser,  or 

anyone in his stead, makes even the slightest modification or adjustment to the purchased product.
The unit has been designed to satisfy at best the present needs of the domestic central vacuum clea

-

ners market, both in terms of quality and operating capacity. 
All materials and components used to manufacture this product comply with CE safety regulations. 
In compliance with safety regulations detailed in the Machinery Directive 2006/42/CE (transposed into 
the  Italian  Legislation  by  Decree  Law  17/10),  in  the  Low  Voltage  Directive  2006/95/CE,  and  in  the 
Electromagnetic Compatibility Directive 2004/108/CE, the Vacu Pro system complies with the standard 
established for electrical appliances for household and similar purposes EN 60335-1 (2008) and with the 
Regulation C EN 60335-2-2 (2011), specially conceived for vacuum cleaners for household and similar 
purposes with rated voltage not exceeding 250 V.  

It is recommended to read carefully all the installation, use and maintenance instructions
detailed in this manual.

4.1 Warning

• Keep children away from the vacuum cleaner whilst in function. Children should not play with the ma

-

chine nor with the suction sockets. 
• This equipment should not be used by people (including children) with reduced psychic, sensory or 
mental capacities or by people with no experience nor knowledge of the system, unless they are under 
the guidance or instructed to use the machine by people responsible for their safety. 
• Children must always be supervised to ensure they do not play with the machine. 
• Switch off the power supply immediately if:

  - The electric cable is damaged or worn 

  - The vacuum cleaner has been exposed to rain or excessive humidity 
  - The vacuum cleaner has been knocked or the outer cover has been damaged in any way
  - You think the system requires maintenance or repair 

• 

Wear protective gloves and mask to carry out maintenance, to empty the dust bin or replace and clean the filter. 

• Only use original spare parts and accessories. 
• Do not use the system without a filter cartridge.
• Do not block the exhaust air pipes or the motor cooling intakes.
• No part of the body should come into contact with the suction accessories.
• Use only one suction socket at a time.    
• Do not leave the system switched on when not using it and disconnect it from power supply when the 
system is not going to be used for a long period of time. 

Finally,  remind  that  pictograms  or  danger  and  warning  signals  can  be  found  on  those  parts  of  the 
equipment where, if not strictly followed, potential risky situations may occur.

Содержание Vacu PRO





















Отзывы: