13
2
27/04/2022 Rev:1.0.0
English
6.4 Connection to the piping network
1. Apply the closing cap (A) on the end of the intake connection not used for connecting the pi
-
ping network (B), as opening it would decrease the central vacuum unit’s vacuum power.
A
D
E
B
C
2. Using the sleeve, connect the dust inlet coupling of the cyclonic vacuum cleaner, identified with (C)
in the picture, to the suction pipe from the piping network.
3. By using the sleeve, connect the air outlet of the central vacuum unit, marked with (D), to the air
outlet of the house.
4. Glue the silencer (E) on the exhaust pipe near the exhaust air grid.
N.B.: do not glue the pipe end of the network pipe to the dust inlet coupling or to the air exhaust cou
-
pling: always use the sleeves provided.
