Stairville Show Bar Pro, Руководство пользователя

Страница: 24 / 48

Automatic operation can only be activated when the unit is operating in stand alone mode or
as master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
Press
[MODE] repeatedly until the display shows ‘AUTO’ .
A preprogrammed automatic show can only be activated when the unit is operating in stand-
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press
[MODE] repeatedly until the display shows ‘Pro’ . Press [SETUP] . Now you can select one of
the preprogrammed automatic shows. Use [UP] and [DOWN] to select a value between ‘Pr.01’
and ‘Pr.25’ .
Settings for programme 01:
For
‘Pr.01’ , you can choose from 19 basic colours, maximum intensity or blackout of all LEDs.
Press [SETUP] . Now use [UP] and [DOWN] to select a value between ‘1.--r’ and ‘19.on’ or ‘-OFF’ .
To adjust the flash frequency, press [SETUP] . Now use [UP] and [DOWN] to select a value
between ‘FS.00’ (slow) and ‘FS.99’ (fast).
Settings for programmes 02 … 25:
To adjust the speed of the selected auto show, press
[SETUP] repeatedly until the display
shows ‘SP.xx’ . Now use [UP] and [DOWN] to select a value between ‘SP.01’ (slow) and ‘SP.99’
(fast) or ‘SP.FL’ .
To adjust the flash frequency, press [SETUP] repeatedly until the display shows ‘FS.xx’ . Now use
[UP] and [DOWN] to select a value between ‘FS.00’ (slow) and ‘FS.99’ (fast).
Operating mode ‘Automatic’
Operating mode ‘Preprog‐
rammed automatic show’
Operating
24
Show Bar Pro 16x10W RGBAW IP65
LED Floodlight