Stairville SH-150, Руководство пользователя

Страница: 4 / 8

- 4 -
4. Operation
Plug the remote control cord into the slot marked “REMOTE •
CONTROL” on the rear side of the fog machine. Plug the power cord
into a grounded electrical outlet.
Turn on the power switch located on the back of the
• fog machine.
The red light on the remote control will turn on once the machine is •
plugged into a power outlet and the on/off switch is turned on.
Once the red light comes on the machine must warm-up .This period
•
varies depending on conditions but should not take more than 10
minutes under any circumstances.
The green light on the remote control will turn on once the machine is
•
ready to produce haze. When the green light turns on, the machine may
be operated using the remote control.
The fog machine is controlled via the remote control. Please refer to the
•
section titled Remote Control Operation for detailed instruction on the
various functions available.
Prior to the green light turning on the machine will not haze and the
•
functions will not respond.
When the Fogger does not have any liquid in the machine the PC board •
will shut off the pump so that the machine will not be damaged. The
pump will remain off until fluid is added to the machine.
Important:
Always monitor tank fluid level during operation. The fog machine can
suffer damage when run without fluid. If the machine does not function
after having been run without fluid, please contact your Fogger dealer for
service.
Remote Control Operation
The INTERVAL knob adjusts the time between discharges when •
the timer function is engaged. The range is from 10 seconds ~ 200
seconds.
The second knob labelled “VOLUME” controls the volume of haze •
produced. The range is from 0% ~ 100% of maximum output.
The yellow TIMER button controls the timer function. Depress the button •
to activate it. When activated the yellow light will turn on. Adjusting the
interval knob will determine the time between haze output (10~200
seconds). The duration of output is set at 13 seconds. The volume
can be adjusted using the volume knob to control the amount of haze