Stairville MaTrixx TLB-20 MK-II RGBW, Руководство пользователя

Страница: 28 / 44

This setting is only relevant if the unit is operated as slave device in a master / slave configura‐
tion and is not controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘SLAv’ .
Wait about 30 seconds until the display turns off. Then the settings have been applied. To
return to the higher menu level without changes, press [Mode] .
A sound-controlled automatic show can only be activated if the unit is working in standalone
mode or as master device in a master / slave combination. This setting is only relevant if the
unit is not controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘SOUN’ . This will activate a sound-controlled
automatic show.
Press
[Setup] . Now you can adjust the sound-control sensitivity of the built-in microphone. Use
[UP] and [Down] to select a value between 0 (low sensitivity) and 31 (high sensitivity), the dis‐
play shows ‘S1.00’ … ‘S1.31’ .
Wait about 30 seconds until the display turns off. Then the settings have been applied. To
return to the higher menu level without changes, press [Mode] .
Operating mode ‘Slave’
Sound-control and microphone
sensitivity
Operation
LED flower effect
28