Stairville MaTrixx TLB-20 MK-II RGBW, Руководство пользователя

Страница: 25 / 44

A built-in automatic show can only be activated if the unit is working in standalone mode or as
master device in a master / slave combination. This setting is only relevant if the unit is not
controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘Pr.xx’ . Press [Setup] . Now you can select one
of the preprogrammed automatic shows. Use [UP] and [Down] to select a value between ‘Pr.01’
and ‘Pr.25’ .
To adjust the speed of the selected automatic show, press [Setup] . Now press [UP] and [Down]
to choose a value between ‘SP01’ (slow) and ‘SP99’ (fast) or ‘SPFL’ (flash effect).
To adjust the flash frequency, press [Setup] . Now press [UP] and [Down] to choose a value
between ‘FS00’ (slow) and ‘FS99’ (fast).
Wait about 30 seconds until the display turns off. Then the settings have been applied. To
return to the higher menu level without changes, press [Mode] .
Operating mode ‘Built-in auto‐
matic show’
Operation
MaTrixx TLB-20MK-II RGBW
25