●
Signal Connection and Address Code Dialing
When the controller outputs the standard DMX512 signal, the
connection of which is accomplished
through the “input” and “output” 3-pin XLR socket. When a console signal outputs to the unit, it must
correspond to the Pin 1 Ground, Pin 2 Negative and Pin 3 Positive of the XLR socket on the unit. If it
does not work just try exchanging the Pin 2 and Pin 3 (these 2 pins are generally do not need
exchanged for consoles). The signal wire length should not exceed 100m in order to avoid the
interference of the other signals by any other electric appliances.
This unit adopts the 3 pins XLR socket, detail connection of many units as bellow:
If your DMX-512signal controller adopt 5 pins XLR plug, you need one transfer line, the transfer
method as following:
5
